Monster Kneeboard Rack

Rating:
s:2:"80";%
As low as $349.00
In stock
Only %1 left
Fedex logoEstimated Delivery: -
*Continental US Only

If kneeboarding is your thing, this extra beefy Monster Kneeboard rack is a must have for your wakeboard tower.

What size mount do I need?

Unsure about the tubing size on your wakeboard tower? All Monster Towers are 2.5" in diameter. If your boat has a wakeboard tower from another manufacturer, please refer to the below chart to calculate your tubing size.

  1. Take a piece of string and wrap it around your tower leg.
  2. Measure the length (in inches) of the string. This is the circumference of your tower.
  3. Using the chart below, find the diameter that corresponds closest to the circumference measured in the previous step. This is the size mount you will need.
Circumference (inches) Diameter (inches)
5 1/8 1 5/8
5 7/8 1 7/8
6 5/16 2
7 1/16 2 1/4
7 7/16 2 3/8
7 7/8 2 1/2

Each Monster kneeboard rack is equipped with a thick rubber bumper to protect your board and a flexible tab to reduce rattle and accommodate boards of various thicknesses up to 4". These racks, like our others, include a simple but effective UV resistant shock cord to hold the kneeboards in place and the spread between the forks is adjustable for different board lengths. The quick release mounting system allows you to remove the rack without tools for security purposes, when trailering, or when docking in a tight slip. Just flip the latch and simply take off the rack. The clamp stays attached to the tower so it takes just seconds to return the rack to the tower when ready to hit the water once again.

The standard rack features a 2.5" diameter clamp. If your tower is smaller than 2.5", no problem! Simply select the kneeboard rack with the optional Universal Inserts to fit most towers from 1 5/8" to 2.5". You can also order the kneeboard rack with the popular Swivel Adaptor so you can easily access your board from inside the boat.

Video Transcription:

Hey there, this is Steve Beck from Monster Tower. Here are universal kneeboard racks for all you guys still stuck in the eighties riding kneeboards. This is the knee board rack for you. It is made of aluminum in 6063 T6 and it comes in brushed anodized, finish, which gives you superior corrosion resistance. Rack is universal because you can buy it with universal inserts to fit any size pipe diameter. We've got you covered from 1 5/8 all the way up to two and a half inch pipe and this clamp is quick release so you can pull your rack off, leave the clamp on the tower in case your pulling into a boat slip or docking up with somebody. It's really easy to take your rack off and put it right back on when you had it. You can also adjust these clamps so the forks are always parallel with the water, so your boards are always looking nice and flat on the side of your both a rubber bumpers to protect your board when it's in here and you've got a four inch gap right here. Hold that in, and then we've also got a bungee cord to secure it. You've got two different settings on the bungee cord for depending on the size of your board. This Rack is a five year warranty. If you don't love it, we want it back.

Fits any board up to 4" thick
Fits ANY tower 1 5/8" to 2.5" diameter with universal tower inserts
Made with strong 6063 aluminum and 303 stainless steel components and fasteners
Long lasting brushed, bright dipped anodized finish
Thick rubber bumper protects boat and boards
UV resistant heavy duty shock cord holds boards safely in place
Adjustable fork to accommodate any length board--16.5" max spread
Includes quick release mechanism for easy removal
Guaranteed silent
WARNING: Cancer and Reproductive Harm p65warnings.ca.gov/product
Features
Fits any board up to 4" thick
Fits ANY tower 1 5/8" to 2.5" diameter with universal tower inserts
Made with strong 6063 aluminum and 303 stainless steel components and fasteners
Long lasting brushed, bright dipped anodized finish
Thick rubber bumper protects boat and boards
UV resistant heavy duty shock cord holds boards safely in place
Adjustable fork to accommodate any length board--16.5" max spread
Includes quick release mechanism for easy removal
Guaranteed silent
Specifications
Resources
WARNING: Cancer and Reproductive Harm p65warnings.ca.gov/product
monster kneeboard rack on wakeboard tower

Ideal Kneeboard Storage

Our kneeboard rack holds boards as thick as 4 inches. The rack is designed to be mounted on vertical tubing instead of horizontal. Plastic clamp inserts are used to ensure your rack will be completely silent when attached to your tower. It is ideal for wakeboard towers with 2-1/2 inch diameter tubing. If your tower has a tube diameter between 1-⅝ inches to 2-½ inches, you can get a set of universal plastic inserts (sold separately) to allow this rack will fit on your wakeboard tower.

monster tower polished kneeboard rack

Quality Construction

Constructed of machined 6063 billet aluminum, this kneeboard rack is durable and lasts a long time because it has been bright-dipped anodized. Stainless steel fasteners are used to provide even more strength. The CNC grooved channel has been inlaid with an EPDM rubber bumper that is flexible to prevent your kneeboard from becoming damaged. Flexible semi-circle tabs are used to accommodate different board thicknesses. Its brushed finish hides fingerprints, scuffs, and scratches to keep your board looking brand new.

monster tower kneeboard rack

Superior Board Protection

Securing your kneeboard in the rack is simple with the UV-resistant, elastic shock cord. This cord is cloth coated for additional protection. You can easily set the right tension on your cord since it can be strapped onto either of the two notches machined into the rack. To find the right fit, you can adjust the width of the forks. By securing your kneeboard in the rack, you keep clutter off your boat. For easy access to your board, you can add a swivel adaptor (sold separately) that allows your boards to swivel in and out of the boat. To get a full 360-degree range of motion, the rack comes with a machined clamp that has a four point indexing system so the rack can simply adjust with two set screws.

monster tower kneeboard rack

Easy Access and Removal

Since it is unsafe to ride down the highway with racks and boards still attached to the tower, we have integrated a quick release cam lever that removes the entire rack assembly with the boards still strapped in. This device is very convenient for when you are docking your boat or pulling into a boat slip or garage. You need this kneeboard rack to easily store your board while you are out on the water and to easily remove it when you head back home!


Shipping Information

Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship.

Returns Policy

If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return. For additional information, please refer to our Return Policy.

Warranty

Most products come with a 5-YEAR warranty. For any products that arrive scratched, bent, or dented we'll replace upon thorough inspection. Please refer to the Warranty Policy for more information.


Got a Question?

Do you make make black knee board racks

No, we do not offer our knee board rack in black.

What rack is best to hold both wake board and water skis

We do not have that in a combination rack. You would need one wake board rack and one water ski rack.

Do you offer the kneeboard holder in black? And would you only sell the actual part that holds the kneeboard? I am replacing a wakeboard/surfboard holder I got from you guys. So I have the tower mount and the straight piece.

No we do not offer the kneeboard rack in black. Yes, please give us a call to order.

can i get a black knee board holder

Unfortunately, we only make these in polished silver.

Did you find what you were looking for?
Customer Reviews

4

1 reviews

More info

100% of customers recommend this product

Write a review

Share your thoughts with other customers

Top customer reviews

  1. Wake board 0 people found this helpful
    Rating

    The rack is great quality but it isn't quite big enough to fit my wake board, I need about another 1/2". I'd like to see you make a rack that has an adjustable opening.
    Was this review helpful?
    0
    0

1 Item

Show per page
Write Your Own Review
You're reviewing:Monster Kneeboard Rack
Your Rating
© 2022 Monster Tower. All Rights Reserved.