Monster Over the Top Bimini
Estimated Delivery: - *Continental US Only
Add shade on deck without sacrificing headroom with the Over the Top Bimini.
Note: All biminis take an additional 10-14 business days to ship. Colored biminis are not eligible for returns.
Not sure which Monster Tower you have?
Use this guide to find out.
Over The Top Bimini Dimensions
| Tower Model | Bimini Width | Bimini Length |
|---|---|---|
| MTK | 72" | 72" |
| MT1 | 65" | 62" |
| MT2 | 65" | 62" |
| MTE | 64" | 64" |
| Made from premium, UV-resistant Sunbrella canvas |
| Current models include heavy-duty stainless steel fittings and mounting hardware. Bimini tops for MTKs purchased before 4/2014 utilize black nylon fittings to match the original design. |
| Folds down easily without tools |
| Matching storage boot included |
| Rated for speeds up to 45 mph on the water (should be stowed when trailering) |
-
Cargo Rack BiminiAs low as $1,099.00 -
HangTyte - Boat Cover Suspension SystemSpecial Price $49.99 Regular Price $59.99
Premium Sunbrella Canvas
The premium Sunbrella Canvas construction of this bimini top will block out the sun, providing you with shade, and give you a little protection if it rains. Made of 100% solution dyed acrylic, this material will withstand constant use out on the water and in the sun. The fabric is long lasting and comes in several colors to match your boat’s look, and all of them are resistant to fading. The canvas is breathable, mildew resistant, and repels water. You will want to clean your cover to ensure a long life, and you should rinse it about once a month and let the canvas air dry. If you take care of your bimini canvas, it will increase its longevity!
Store the Bimini Without Removing It from the Tower
You do not have to remove your bimini from the tower to store it when it is not in use. With every bimini purchase, you will get a free storage boot in matching canvas. First, you will need to fold your bimini. The legs will come together, and you will secure them in place with velcro straps. Then you’ll push the canvas fabric into the boot, and secure it with a strap to keep the bimini in place. With this foldable design, you’ll be able to fold and unfold your bimini easily, whether you are out on the water or back at the dock. Not only is it easy, you will not have to remove the bimini from the tower!
Heavy-Duty Stainless Steel Fittings
For the best performance and longest life on your boat, Monster Tower's Over the Top Bimini comes standard* with stainless steel fittings. Stainless steel offers a much stronger fit than competitive plastic and composite materials and withstands the stresses of higher on-the-water speeds. Additionally, the stainless finish better matches your bimini’s frame for a clean, modern look.
* The MTK Version 1 bimini (for MTKs purchased prior for April 2014) comes with nylon fittings to match the original design
Trailering a Boat with a Bimini
Monster Tower biminis are rated for speeds up to 45 mph on the water but need a little extra care when your boat is being trailered. For your convenience, you do not have to remove your bimini before you put your boat back on your trailer. When you’re ready to travel home, simply fold your bimini and stow it in the included storage boot.
Shipping Information
Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship. International customers are responsible for all duties, taxes, brokerage fees, and any other related import fees.
Returns Policy
If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return. For additional information, please refer to our Return Policy.
Warranty
Most products come with a 5-YEAR warranty. For any products that arrive scratched, bent, or dented we'll replace upon thorough inspection. Please refer to the Warranty Policy for more information.
Got a Question?
Yes, our cargo rack bimini is able to also be used for storage.
When you order one of our over the top biminis that are compatible to our towers it will come with all needed hardware to install it, that will include the frame.
Typically, we recommend that none of our towers would work with factory biminis. We have seen cases where customers have gotten it to work, that being said there is no way to determine if it will work or not until the tower is there with the factory tower. We do off our over the top bimini for each one of our towers as they are made to work with each tower specifically.
Yes you can tow with a bimini all the way open.
No, we do not have any towers that would line up with the OEM holes. We would also recommend creating new holes when you install a tower.
On the MTK tower, the MTK over the top bimini would extend 3 foot towards the front of the boat and 3 foot towards the rear of the boat from the ski tow point.
No, our over the tower biminis are only designed to work with our select towers.
No, our over the top biminis are specific for our towers. You would need the MT1 over the top bimini for the MT1 tower.
The MTK tower can fold down with the bimini attached in it's boot and secured to the header of the tower. On the MTE, MT1, and MT2 the bimini secured in it's boot would need to be removed to move the front legs. The MT2 is what we recommend for boats over 20 ft in length. A few key differences would be the MT2 normally has black header knobs at the top of the header section. The front legs will also be different in length The MT1 along the arc measure 69", the MT2 legs along the arc measure 85".
If the tahoe q6 red is a true red, yes.
Yes, we can sell you a bimini top if you have a Monster Tower. Our over the top biminis will only work for their coordinating tower.
Our bimini cover more and likely will not fit factory wake towers.
Yes you can tow when the bimini top is up.
Thanks for your interest in Monster Tower. Unfortunately we can’t guarantee that your current bimini top is going to work with one of our towers. Most of the time bimini tops that are on boats without towers are made wider and or taller than a tower can accommodate. There is a chance that you could remount the bimini or mount the tower in a slightly different spot than normal and they would work together. The bimini could also possibly be modified to fit under the tower by cutting down some of the bimini structure. We can’t guarantee that this will work, but we have had people successfully use their current bimini tops by doing one of these methods. If your current top does not work, we do offer bimini tops that work with our towers. Again, thanks for your interest in Monster Tower and please let us know if you have any further questions.
Typically, we recommend that none of our towers would work with factory biminis. We have seen cases where customers have gotten it to work, that being said there is no way to determine if it will work or not until the tower is there with the factory tower. We do off our over the top bimini for each one of our towers as they are made to work with each tower specifically.
4.9
83% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
- MT1 Tower Bimini 0 people found this helpfulEasy to install. Great shade and looks nice!
- fast shipping great bimini 2 people found this helpfulshipping was so fast, finally i have shade, the quality is excellent, installation was easy, lost my first one so this is my second. :)
- Super fast shipping, good quality 3 people found this helpfulWe received the Bimini top very quickly after ordering and it is great quality. Would definitely recommend!
- Excellent Quality and Fairly Straightforward Install 8 people found this helpfulThe quality and fit of this top is top notch. Heavy Sunbrella canvas and chromed stainless hardware. There are also vinyl wear patches on the underside where the top contacts the tower. Well thought out. If there is possibly one thing that could be improved, the instructions are not the greatest in the world. It is a one pager with one image and measurements. There are no images with the top in place or finished product. It works, but you have a little guesswork as far as exact placement of hardware. I did a mockup "test fit" install with zip ties first, zip tied all the hardware and top in place using the measurements provided. I then cut the ties one hardware piece at a time and drilled. That helped. You are drilling 12 holes in your tower, not something you want to get wrong.
- Bimini for MX tower 1 people found this helpfulEasy to install, customer service is great! Everything arrived as expected, installed in about 30 minutes, and works exactly as advertised.
