Monster Wakeboard Rack

Rating:
s:3:"100";%
As low as $279.00
In stock
Only %1 left
Fedex logoEstimated Delivery: -
*Continental US Only

Monster's exclusive Wakeboard Rack features adjustable forks and a quick release mechanism.

What size mount do I need?

Unsure about the tubing size on your wakeboard tower? All Monster Towers are 2.5" in diameter. If your boat has a wakeboard tower from another manufacturer, please refer to the below chart to calculate your tubing size.

  1. Take a piece of string and wrap it around your tower leg.
  2. Measure the length (in inches) of the string. This is the circumference of your tower.
  3. Using the chart below, find the diameter that corresponds closest to the circumference measured in the previous step. This is the size mount you will need.
Circumference (inches) Diameter (inches)
5 1/8 1 5/8
5 7/8 1 7/8
6 5/16 2
7 1/16 2 1/4
7 7/16 2 3/8
7 7/8 2 1/2

The Monster Tower wakeboard rack features 1.25" fork widths and can be easily removed for storage or travel. Rubber bumpers and a bungee retaining strap keep boards more secure. Brushed and anodized aluminum material is both durable and stylish.

Each wakeboard rack is equipped with a quick release mounting system which allows you to remove the rack without tools for security purposes, when trailering, or when docking in a tight slip. A nylon collar bushing protects the tower and like almost all of our products makes the wakeboard rack universal. Each rack is shipped standard with our universal tower inserts which is a set of various sized collars for you to fit the rack to ANY tower 1 5/8" to 2.5" diameter!

Video Transcription:

Hey, what's up? This is Steve Beck from Monster Tower to tell you about our monster tower universal wakeboard racks. We've got these in silver or black. This is a black anodized and it is gives you superior corrosion resistance. This is aluminum, 6063 t-6 aluminum. What makes this rack universal is we have universal inserts you can order with universal inserts. It comes standard 2.5”. If you have a Monster Tower, 2.5”, all you need, but if you have another size diameter tower, we've got all these different size inserts in a pack. You can make it fit from 1 5/8” 2.5”. That's what makes it very universal and these racks are super adjustable as well, so you can adjust this angle, this clamp, so your forks are always parallel with the water and your boards are looking nice and level however you want them to. They also have a quick release on it so you can pull your rack right off when you're backing into the garage or docking with somebody. You don't want your rack hanging out pulling in a boat slip, so you can pull it right off and then pop it right back on. So that's using tools. Your clamp stays right in the same place we've got our rubber inserts here. Protect your board, keeps them nice and snug in there. And then you got a bungee cord with two different options to hook it on to keep your board and secured. Comes with a five year warranty. And if you don't love it, we want it back. Check it out of monstertower.com.

Fits ANY tower 1 5/8" to 2.5" diameter with universal tower inserts
Thick rubber bumper protects boat and boards
Brushed and anodized aluminum construction
UV resistant heavy duty shock cord holds boards safely in place
Adjustable fork to accommodate any size board
Holds boards up to 1.25" thick
Includes quick release mechanism for easy removal
Guaranteed silent
WARNING: Cancer and Reproductive Harm p65warnings.ca.gov/product
Features
Fits ANY tower 1 5/8" to 2.5" diameter with universal tower inserts
Thick rubber bumper protects boat and boards
Brushed and anodized aluminum construction
UV resistant heavy duty shock cord holds boards safely in place
Adjustable fork to accommodate any size board
Holds boards up to 1.25" thick
Includes quick release mechanism for easy removal
Guaranteed silent
Specifications
Resources
WARNING: Cancer and Reproductive Harm p65warnings.ca.gov/product
monster wakeboard rack holding wakeboard

Quality Construction for Ideal Wakeboard Storage

Store your wakeboard efficiently with our wakeboard rack. It comes in a brushed finish to hide fingerprints, scuffs, and scratches and keep it looking new for years. With its bright-dipped anodized and machined 6063 billet aluminum construction, this rack will last a long time and is heavy duty. 304 grade stainless steel fasteners provide added strength and longevity. To prevent compression and indentation of your wakeboard, EPDM rubber bumper has been inlaid into the CNC grooved channel on each fork tang. To reduce rattling of thinner boards, flexible semi-circle tabs are built into the rubber bumper. These tabs help to accommodate different boards thicknesses. While this rack is ideal for installation on wakeboard towers with 2-1/2 inch round tubing, you can attach it to towers with diameters ranging from 1-⅝ inches to 2-½ inches by getting plastic universal inserts (sold separately) that fit into the mounting clamp. With the use of plastic universal inserts, our wakeboard rack is completely silent, guaranteed. Our brushed finish rack can be mounted on any round, vertical tubing.

monster wakeboard rack installed on wakeboard tower

Adjustable to Fit Any Wakeboard

A UV-resistant, heavy-duty elastic shock cord holds wakeboards in place in the rack. For additional protection, the cord is cloth coated. There are two notches machined into the rack for various sizes of wakeboards, including child and adult sizes. The rack is designed to hold boards with thicknesses up to 1.25 inches. Adjustable width forks enable you to find the correct fit for your board.

monster wakeboard rack holding wakeboard

Easy Access and Superior Safety

Our machined clamp comes with a four-point indexing system so you can easily adjust it with two set screws to gain a full 360-degree range of motion, ensuring your boards are parallel to the water. If you want to be able to easily access your boards while keeping your boat free of clutter, you can add a swivel adaptor (sold separately). This device allows the rack to swivel in and out of the boat. When you are ready to go home after a long day of wakeboarding, you will love the convenience of our quick release cam lever. Instead of removing boards from the rack when transporting your boat, the lever allows you to simply remove the rack from your tower with your boards still strapped to the rack. Our wakeboard rack is the perfect accessory for your tower when you wakeboard.


Shipping Information

Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship.

Returns Policy

If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return. For additional information, please refer to our Return Policy.

Warranty

Most products come with a 5-YEAR warranty. For any products that arrive scratched, bent, or dented we'll replace upon thorough inspection. Please refer to the Warranty Policy for more information.


Got a Question?

Will these fit on a wake tower on a 2021 chaparral 21 surf? I believe the waketower is square
Can you get this in white
Will this rack fit a tower for a Yamaha 252S?
When do you expect to have more in stock?
I have a 2005 cobalt 272 with chrome tower. Will this adapt?
Did you find what you were looking for?
Customer Reviews

5

3 reviews

100% of customers recommend this product

Write a review

Share your thoughts with other customers

Top customer reviews

  1. Great Wakeboard rack 1 people found this helpful
    Rating

    Ordered a wakeboard rack for our boat for the summer and it arrived so fast! It was so easy to install and works and looks great! Holds our wakeboard sturdy on the lake and is easy to pop off if needed. Very happy with our purchase

    Response from store

    We are glad this is working out for you so well! Thank you for the review and happy boating.
    Was this review helpful?
    0
    0
  2. Verified Buyer

    Look no more 1 people found this helpful
    Rating

    I have been looking for a rack that was cheap and durable but those two just dont go together. I wanted to make sure my 2 ronix boards would not fall off while going down the river so I purchased this. Works perfect looks great.
    Was this review helpful?
    0
    0
  3. Perfect 1 people found this helpful
    Rating

    Ordered this for my AR210. Got the universal fittings to be safe. Best Product on the market when it comes to wakeboard racks.
    Was this review helpful?
    0
    0

3 Item(s)

Show per page
Write Your Own Review
You're reviewing:Monster Wakeboard Rack
Your Rating
© 2022 Monster Tower. All Rights Reserved.