MTK Wakeboard Tower
Estimated Delivery: - *Continental US Only
The versatile and attractive MTK wakeboard tower features a stunning forward-facing design to enhance the look of your boat.
Please Note: If ordering a bimini with your tower it will ship separately after an additional 10-14 business days. Colored biminis are not eligible for returns.
The stunning forward-facing MTK tower is designed to complement and enhance the appearance of your boat. The MTK features beefy 2-1/2" diameter pipe construction and a protective finish. This tower can be top- or side-mounted and you can fold either forward or aft to meet your needs (installation requires a minimum of 17" or unobstructed fiberglass mounting surface).
If you are looking for the ultimate wakeboard tower that is durable, able to store your gear, and pull wakeboarders behind your boat, the MTK wakeboard tower is what you have been looking for. We have designed this tower to be easy to install and use while you are out on the water.
Ordering a bimini top with your tower? Please note: If ordering a bimini with your tower it will ship separately after an additional 10-14 business days. Colored biminis are not eligible for returns.
| Universal-fit: for all boats longer than 16 feet, 76” - 102” wide. |
| 2-1/2" diameter 6061/63 aluminum pipe construction affords strength, quality surface finish and superior corrosion resistance. |
| Includes integrated tow point navigation light. |
| Dual top supports for additional accessory mounts. |
| Choice of polish and anodized or black powder-coated. |
| Easy to install at home or by your local Monster Tower dealer. |
| Five year warranty. |
| Approximate tower height is 44-50 inches. |
Not sure which tower will look best? See it on your boat
-
MT7 Wakeboard TowerAs low as $2,199.00 Regular Price $2,799.00 -
Monster Over the Top BiminiAs low as $849.00 -
Cargo Rack BiminiAs low as $1,099.00 -
Wakeboard Wakesurf Rack - BlackAs low as $299.00 Regular Price $399.00 -
Wakeboard Wakesurf Rack - PolishedAs low as $299.00 Regular Price $399.00 -
Monster Wakeboard Rack - BlackAs low as $299.00 Regular Price $399.00 -
Monster Wakeboard RackAs low as $299.00 Regular Price $399.00 -
Universal Boat Flag HolderSpecial Price $99.00 Regular Price $149.00 -
Boat Flag PoleSpecial Price $49.00 Regular Price $69.00 -
HangTyte - Boat Cover Suspension SystemSpecial Price $49.99 Regular Price $59.99 -
LED LightbarAs low as $499.00 Regular Price $599.00 -
LED Light Set (pair)As low as $219.00 -
Monster Tower Light Set (pair)As low as $99.00 Regular Price $179.00 -
MTK LED Navigation Light$57.00
Folds In Minutes Without Tools
To ensure a great experience both on and off the water, the MTK folds down in just minutes. No additional tools are needed thanks to included quick release knobs - simply loosen the knobs and the towers folds down with ease. Based on your preferences and your boat’s layout the MTK tower can be set up to fold either forward or aft, a choice that’s determined during the installation process. This innovative folding capability makes the MTK perfect for low garages, dry stack storage, HOA compliance, and more!
Industry-Leading Construction
The MTK is our premium wakeboard tower. It is constructed from industry-leading 2.5-inch diameter 6061 aluminum for strength and corrosion resistance. To create a solid foundation, the base (also known as the Monster Foot) is machined out of billet 6061 aluminum. A heim joint, along with our Monster Paws, ensure the MTK can mount to the contours and angles of your boat’s fiberglass, providing a precise fit. For even more strength and stability, 304 stainless steel fasteners are used throughout the tower.
Easy, DIY Installation
One of the perks of this tower is you can easily install it yourself. Monster Tower provides illustrated instruction manuals as well as helpful tips and videos so you won’t have to take your tower to a dealer. During installation, the way you orient the Monster Foot determines whether the tower will fold forward or aft (see instructions for further details), giving you complete control. The MTK has a modern design since it is forward facing with two mounting locations. These mounting locations are aft, providing the driver of the boat with an unobstructed view. This tower can be mounted on the top or side of your boat’s gunwale to fit a variety of boat styles. All you need is 17 inches of unobstructed fiberglass mounting surface. For proper installation, the back and front base must be on the same plane.
The Ultimate Wakeboarding Experience
The MTK wakeboard tower folds down quickly and easily for storage or low clearances. Thanks to included Quick Release mounts, tools are not required to fold your tower down. The tower is pre-drilled for wiring and each hole has a rubber grommet that gives it a finished look. To simplify installation even more, this wakeboard tower comes with our patented hinged one-piece top section. The MTK comes with a swivel tow point with integrated LED navigation light to provide the ultimate wakeboarding experience. This one-piece construction eliminates that rattling that is commonly experienced with “tube-in-tube” installations of competitive models. This tower is guaranteed to be silent. If you don’t love it, we want it back!™
An OEM Favorite
For years, boat OEMs (including Bayliner) have used the MTK as their factory option on new boats for its style and quality. To match the look of your boat, you can choose from 4 finishes. Get the MTK in Stealth Black (matte), Polar White (glossy), Gloss Black Powder Coat, or Polished/bright-dipped anodized. Regardless of your boat’s style, the MTK wakeboard tower is designed to fit on boats with a beam width of 76 to 102 inches and can be top or side mounted. The tower also has dual header so you can mount a variety of accessories, from speakers to lights. An over-the-top bimini is available to provide shade on the boat. If you want a heavy duty wakeboard tower with style and options, the MTK wakeboard tower is for you!
Shipping Information
Most packages ship via FedEx. When you place your order, you will have a choice of delivery timeframes (Ground, Second day, etc.). You will also receive an order confirmation which will allow you to track your shipment's progress. Keep in mind that while most items ship same day, some products require longer time to ship. International customers are responsible for all duties, taxes, brokerage fees, and any other related import fees.
Returns Policy
If for any reason you are not completely satisfied with your purchase, give us a call within 30 days and we can issue you an RMA. Because we are constantly striving to improve our products to meet the needs of our customers, we ask that you provide us with feedback regarding your return. For additional information, please refer to our Return Policy.
Warranty
Most products come with a 5-YEAR warranty. For any products that arrive scratched, bent, or dented we'll replace upon thorough inspection. Please refer to the Warranty Policy for more information.
Got a Question?
The MTK tower has a universal fit with boats that have a beam of 76"-102".
The MTK weighs approximately 65 pounds.
Our phone number is 877-778-6937
Unfortunately, pulling tubes from our towers is not recommended and all warranties will be voided if our towers are used to do so. You can pull anything from a tower that the rider is holding onto the rope, such as skiing, wakeboarding, knee boarding, etc. The force that a tube puts on the tower is much greater than that of a person boarding. Often, the tube is pulled underwater some, which adds even more resistance. Tubes also come with tow rope that can hold a few thousands of pounds of force. While a ski/wakeboard rope cannot withstand the same amount of force and will break before the tower would. To remain safe, attach/hook tubes only to the tow point on the back of your boat.
Yes, they will.
Typically, we recommend that none of our towers would work with factory biminis. We have seen cases where customers have gotten it to work, that being said there is no way to determine if it will work or not until the tower is there with the factory tower. We do off our over the top bimini for each one of our towers as they are made to work with each tower specifically.
Yes, we have seen the MTK tower work with a sea doo challenger, please find examples in the customer gallery.
This tower is universal to boats with a beam from 70'' to 102''. Your Yamaha shows a beam of 102''. However, a top mount would require 17'' of flat, level mounting space. I do not believe you would have that available. If so, the side mount would be required. Please see mounting instructions on our site. Also, tower purchases come with all necessary mounting hardware for either mount.
My records show that the beam on your boat is 96''. The MTK will fit a beam of this width. For your boat, you would need to mount it using the side mount option. Please see the manual on our website to learn more of the mount and tower. Thank you!
This tower is designed to fit a beam of 102'' and be installed as Top or Side Mount. Please see instructions to determine compatibility with your boat. https://monstertower.com/pub/media/monstertower/pdf/MTKManual.pdf Typically, we recommend that none of our towers would work with factory biminis. We have seen cases where customers have gotten it to work, that being said there is no way to determine if it will work or not until the tower is there with the factory bimini. We do offer our Over the Top Bimini for each one of our towers as they are made to work with each tower specifically.
Absolutely.
Typically, we recommend that none of our towers would work with factory biminis. We have seen cases where customers have gotten it to work, that being said there is no way to determine if it will work or not until the tower is there with the factory bimini. We do offer our Over the Top Bimini for each one of our towers as they are made to work with each tower specifically.
I believe you are asking if this tower will fit your boat. If so, this tower is universal to boats with a beam from 70'' to 102''. Your Bayliner shows a beam of 86''. Please see mounting instructions on our site to determine recommended mounting option. Also, tower purchases come with all necessary mounting hardware for either mount.
We have three universal towers that will fit a mounting width of 60-102 inches. Generally, we recommend the MT2 for 20 foot and over boats and the MT1 for 16 foot and over boats. However, they will all fit a mount within the width specifications and include 5-year warranties. The MTE is a more economical tower that will also fit a mount within the range. Another option is the forward facing MTK tower that will fit a width of 76 to 102 inches. This tower must be mounted with the bases level on each side. This can be done utilizing the top mount or the side mount. The hardware that is included can be used to mount in either position. Our newest tower is the MT7. If you would like more information on this one, please email us at info@monstertower.com and we will give you a call to further discuss what is required for installation. You would need to verify that you have access to mount the tower, that reinforcements are added if necessary and that the MTK (if you choose this tower) is mounted level. If you need exact information or current pricing on the five towers you can see them online at www.monstertower.com, and you can also download the instruction manuals online to see how they mount to the boat and the approximate mounting locations. If you would like local support with your specific setup, please see the link below for dealers near you. https://monstertower.com/monster-tower-dealers Please also check out our Customer Gallery below: https://monstertower.com/customer-gallery
We do not recommend installing this tower in the reversed position. We only recommend to install it how it has been designed, engineered and tested. Reversed mounting will void any warranty.
4.9
100% of customers recommend this product
Share your thoughts with other customers
Top customer reviews
- Buy the tower! 0 people found this helpfulWe traded up to our 2007 232 this summer. I have always wanted a tower, but was hesitant to spend the money. We splurged for the Monster tower with a bimini, and I am so glad we did. We love the way it looks and functions on our boat. The quality is fantastic. Super strong with no rattles. Cannot wait to add Monster Tower accessories over time. Buy the tower!
- Love my waketower. MTK 0 people found this helpfulBought the boat with the MTK Monster tower with integrated bimini. It absolutely is an eye catcher. Very high end that dressed up my Regal. Makes all my watersports so fun. The kicker audio system with 4 speakers on tower blow it up.
- tower build and install 0 people found this helpfulGreat product and unique design. very sturdy!
- MT7 Tower 0 people found this helpfulThis tower is amazing and the bimini top is the icing on the cake. Thanks for the great product and ease of installation.
- Love the function and how it looks! 0 people found this helpfulJust had my tower and integrated Bimini installed this week. Love how it functions and looks. Boated without a tower for 25 years. Wish I would have done this sooner. If you’re looking to add an aftermarket tower, this is the one!